What is FMI?
September 12, 2019
What is the Functional Mock-up Interface (FMI)? FMI is an open standard for exchanging dynamical simulation models between different tools in a standardized format. The FMI standard specifies an open format for exporting and importing simulation models. This means that you can select the tool best suited for each type of analysis while keeping the same […]
Modeling and Simulation of Aircraft Aileron Actuator
August 7, 2019
This blog is Part 2 of a blog series that will demonstrate how the Modelon Hydraulics Library is well suited to the model-based development of an Aircraft Hydraulic Actuation System (AHAS).
Modeling Actuation System Architectures with Modelon Hydraulics Library
May 13, 2019
Part 1 of Modelon’s newest blog series, explains how to use Modelon’s Hydraulics Library for modeling full aircraft actuation systems and subsystems. In this first blog post, learn the basics of creating an actuation system architecture.
Increase speed of air conditioning model simulations using Modelon’s Air Conditioning Library and Vapor Cycle Library
April 11, 2019
This blog provides an introduction of the Spline-Based Table Look-up (SBTL) method as well as a sample use case from Ford Motor Company – who utilized the SBTL refrigerant package to speed up their air conditioning system model simulations.
Taking A Flexible Operation Power Plant to the Next Level with Carbon Capture & Storage Technology
March 26, 2019
In this blog, researchers at The Norwegian University of Science and Technology (NTNU) study the effectiveness of CCS technology by utilizing Modelon libraries to develop a dynamic model of natural gas combined cycle (NGCC) power plant with post-combustion CO2 absorption process.
Propagating Replaceable Medium Automatically
March 14, 2019
Many Dymola users who integrate Modelon libraries may currently struggle with selecting the medium in each component. This is forcing users to either do it manually on each component or propagate the medium at a top level for each of them. This manual update is a tedious process, error-prone and not conducive to working efficiently […]
Modelon’s Hydraulics and Pneumatics Capabilities Available in ANSYS Twin Builder™
January 11, 2019
Modelon’s industry-leading hydraulic and pneumatic capabilities are now available as The Twin Builder Fluid Power Library in ANSYS® Twin Builder™.
Siemens Partners with Modelon
December 3, 2018
We’re pleased to announce that Siemens Simcenter Amesim will use Modelon’s OPTIMICA Compiler Toolkit as its Modelica engine in the upcoming Simcenter Amesim 17 release.
Using Modelon’s Hydraulics Library to Model Aircraft Hydraulic Circuit Architectures
November 5, 2018
Modelon’s Hydraulics Library is a comprehensive and versatile library that allows engineers to easily model both EHA and SHA by maintaining reusable and scalable components. Additionally, Modelon’s Hydraulics Library returns reliable simulation results so designers can gain maximum understanding about their system’s performance. In this blog, we’ll show just how easy it is to model both SHA and EHA architectures using the Modelon Hydraulics Library.
Easy Integration of Hydraulics Within A Crane System
August 30, 2018
Integrating hydraulics within your system? The Modelon Hydraulics Library can help. Learn how we used it to model and simulate a hydraulically actuated crane in a few simple steps.